KEEWAY RKV125 User Manual

2.6 Trigger
* Attention
Trigger inspection can be performed on the engine.
Inspection
Remove protecting plate of vehicle block.
Remove lead-wire connector of trigger.
Measure the impedance between blue/white terminal of lead
wire at engine side and grounding vehicle block.
Standard value: 100-200Ω (20℃)
If measured impedance value is beyond the range, please
replace the magneto.

KEEWAY RKV125 Specifications

General

Engine Type	Single cylinder, 4-stroke, air-cooled
Fuel System	Carburetor
Transmission	5-speed
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Cooling System	Air-cooled
Seat Height	770 mm
Weight	135 kg
Fuel Tank Capacity	17 L
Rear Suspension	Dual shock absorbers