When the output is turned on, changing the value with the
navigation control can source voltage and current instantly.
Make sure the output does not damage your device under test
(DUT).
6. Press the OUTPUT switch to turn the output on.
See the "General operation" section of the Reference Manual for
additional details and remote interface examples.
Select a measure function
The Series 2280 allows you to perform the following measure
functions.
What the instrument measures
Concurrent (V + I) Measure voltage and current at the same time
To set the measure function from the Menu screen:
1. Press the M enu key.
2. Under Measure, select Settings.
3. Select the button next to F unction and press the ENTER key.
The selection window is displayed.
4. Select a measure function.
To set the measure function from the Home
screen:
1. Press the Measure soft key. The selection window is displayed.
2. Select a measure function.
See the "General operation" section of the Reference Manual for
additional details and remote interface examples.
To Next Page
Loading...
Need help?
General
