Unpack and inspect the instrument
To unpack and inspect the instrument:
1. Inspect the box for damage.
2. Open the top of the box.
3. Remove the documentation and accessories.
4. Carefully lift the instrument out of the box.
5. Remove the packaging insert.
6. Inspect the instrument for any obvious signs of physical
damage. Report any damage to the shipping agent
immediately.
Do not lift the Series 2281S using the front bezel. Lifting
the instrument by the front bezel can cause instrument
damage.
You should have received the Series 2281S with the
following accessories:
1. Power line cord
2. Series 2281S Quick Start Guide (this document)
3. LAN crossover cable for ethernet
4. Keithley Instruments Safety Precautions
5. Rear-panel mating connector with cover
Refer to the packing list for additional items that might have
shipped with your instrument.
To Next Page
Loading...
Need help?
General
