Keithley 2461 User Manual

When the interlock is asserted, the FORCE and GUARD terminals
should be considered hazardous voltages, even if they are
programmed to a non-hazardous voltage or current.
Potentially hazardous voltages of up to ±250 V may be present at
the Force HI, Sense HI, and Guard terminals when the interlock
circuit is closed. To prevent electrical shock, do not expose
these lines.

Keithley 2461 Specifications

General

Maximum Current	7 A
Power	100 W
Resolution	6.5 digits
Source Measure Unit (SMU)	Yes
DC Voltage	100 V
Maximum Voltage	100 V
Display	5-inch capacitive touchscreen
Connectivity	USB, GPIB
Software	TSP
DC Current	7 A
Current Source Range	0 to 7 A
Voltage Measurement Range	100 mV to 100 V
Current Measurement Range	10 nA to 7 A
Voltage Measurement Resolution	100 nV