Model 6220/6221 Reference Manual SCPI Reference Tables 14-9
Return to Section 14 topics
:COUNt <NRf> Set sweep count: 1 to 9999 or INFinity 1
:COUNt? Query sweep count.
:CABort <b> Enable to abort sweep on compliance: ON or OFF OFF
:CABort? Query compliance sweep abort state.
:ARM Arm the sweep.
:ABORt Abort sweep, Delta, Pulse Delta, or Differential
Conductance immediately.
:LIST Custom sweep operation: 4
:CURRent <NRf>
[,<NRf>, ...<NRf>]
Define list of currents (amps): -105e-3 to 105e-3
:APPend <NRf>
[,<NRf>, ...<NRf>]
Add current points to existing list: -105e-3 to
105e-3.
:POINts? Query number of current list points.
:CURRent? Query list of current values.
:DELay <NRf>
[,<NRf>, ...<NRf>]
Define list of delay values (secs): 1e-3 to
999999.999.
1
:APPend <NRf>
[,<NRf>, ...<NRf>]
Add delay values to existing list.
:POINts? Query number of delay values in list.
:DELay? Query list of delay values.
:COMPliance <NRf>
[,<NRf>, ...<NRf>]
Define list of compliance values (volts): 1e-3 to
105.
:APPend <NRf>
[,<NRf>, ...<NRf>]
Add compliance values to existing list: 1e-3 to
105.
:POINts? Query number of compliance values in list.
:COMPliance? Query list of compliance values.
:DELta Delta operation: 5
:NVPResent? Query connection to 2182/2182A: 1 = yes, 0 = no.
:HIGH <NRf> Set high source value (amps): 0 to 105e-3. 1e3
:HIGH? Query high source value.
:LOW <NRf> Set low source value (amps): 0 to -105e-3. -1e3
:LOW? Query low source value.
:DELay <NRf> Set Delta delay (seconds): 1e-3 to 9999.999 2e-3
:DELay? Query Delta delay.
:COUNt <NRf> Set number of cycles to run: 1 to 65536 or
INFinity.
INF
:COUNt? Query Delta count.
Table 14-6 (cont.)
Source command summary
Command Description Default Sec SCPI
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
To Next Page
Loading...
