B-6 Error and Status Messages Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006 Return to Appendix B topics
1403 RECOVERABLE Factory scripts lost
1404 RECOVERABLE Invalid byte order
1405 RECOVERABLE Invalid ASCII precision
1406 RECOVERABLE Invalid data format
1500 RECOVERABLE Invalid baud rate setting
1501 RECOVERABLE Invalid parity setting
1502 RECOVERABLE Invalid terminator setting
1503 RECOVERABLE Invalid bits setting
1504 RECOVERABLE Invalid flow control setting
1600 RECOVERABLE Maximum GPIB message length exceeded
1800 RECOVERABLE Invalid Digital Trigger Mode
1801 RECOVERABLE Invalid Digital I/O Line
2000 RECOVERABLE Flash download error
2001 RECOVERABLE Cannot flash with error in queue
4900 RECOVERABLE Reading buffer index %s is invalid
4901 RECOVERABLE The maximum index for this buffer is %d
4903 RECOVERABLE Reading buffer expired
4904 SERIOUS ICX parameter count mismatch, %s (Line #%d)
4905 SERIOUS ICX parameter invalid value, %s (Line #%d)
4906 SERIOUS ICX invalid function id, %s (Line #%d)
5001 FATAL SMU is unresponsive
5003 SERIOUS Saved calibration constants corrupted
5004 SERIOUS Operation conflicts with CALA sense mode
5005 SERIOUS Value too big for range
5007 SERIOUS Operation would exceed safe operating area of the instrument
5008 SERIOUS Operation not permitted while output is on
5009 SERIOUS Unknown sourcing function
5010 SERIOUS No such SMU function
5011 SERIOUS Operation not permitted while cal is locked
5012 SERIOUS Cal data not saved - save or restore before lock
5013 SERIOUS Cannot save cal data - unlock before save
Table B-2 (cont.)
Error summary
Error number Error level Error Message
To Next Page
Loading...
Need help?
General
