KeLi D2002E - Page 20

www.kelichina.com Page 20 of 38
4.Set
ponderation
form printing
format
Press[0][1]
Press[Enter]
[Prt **]
[Prt 01]
Display original set ponderation form printing
format
Set printing format to 1, that is non printing
single unite format
Choices：00、01、02、03 series, they are filling
style, non filling single unite, non filling double
unite, non filling three or four unite.
Press [Check] to skip this step, press [Weight]
back to the weighing state
Press [Enter] to finish the setting of
ponderation form printing format.
5．Set the paper
feeding mode
Press[0][2]
Press[Enter]
[Ps **]
[Ps 02]
Display original set paper feeding mode.
Set paper feeding mode to 02, that is continuous
feeding mode and able to feed and withdraw
paper automatically.
Choices：00、01、02；00 is paper form feeding
mode. That is when printing a ponderation
form, a new paper adopts; 01 is continuous
paper feeding mode;
02 is continuous paper feeding mode and able
to feed and withdraw paper automatically.
Press [Check] to skip this step, press [Weight]
back to the weighing state
Press [Enter] to finish the setting of paper
feeding mode.
6．Set the load
cell number
Press[0][4]
Press[Enter]
[Ant-**]
[Ant-04]
Display original set load cell number
Set load cell number to 4(range 1-10)，Press
[Check] to skip this step, press [Weight] back
to the weighing state
Press [Enter] to finish the setting of load cell
numbers.