5756
Hydraulic tting identication
0323-S12-1212
0323-S15-1212
0323-S71-0812
0323-S74-0812
0323-S88-1212
0323-S91-1212
0323-S90
0324-S19-121212
0324-S67-121212
0324-S68-121212
0324-S92-121212
0325-R91-08M
0343-924001261
Note: Fit this end to valve
block
Hydraulics
Before folding the machine for the rst time, ensure all hydraulic cylinders are charged with oil.
To do this, run the hydraulics through the unfold sequence until the outer wings are straight and the centre
cylinders are centred in the slots. (It may take a few minutes for the cylinders to charge completely).
Failure to do this could result in severe personal injury and/or damage to the machine.
!
Cylinders NOT charged
Cylinders charged
To Next Page
Loading...