Kelly KLS8080I/IPS Sinusoidal Brushless Motor Controller User’s Manual V 1.10
www.kellycontroller.com/support.php
Please install the user program in your computer,Tablet or Phone.
4.1,Please turn on the key switch so that the controller can get power supply from B+/B- and
Pin7/Pin6.Please try to open the user program in your computer or other devices.Then you may
try to click Read button in user program or App.You will see the first picture of user program.
Please check whether the Identification Angle item is at 85 or not.It is correct if identification
angle item is at 85.
4.2
，
Because this is a KLS-8080IPS controller based on Sin/Cosin speed sensor.We need to
configure the correct parameters for Sin/Cosin speed sensor settings.Most of PMSM motor with
Sin/Cosin speed sensor is based on RLS Encoder sensor.Anyway please check the data of
Sin/Cosin sensor first.For example,we usually use RMB29AC Sin/Cosin speed sensor.Please
check the features below.
To Next Page
