Kelly Cheetah KLS8412S - User Manual

Kelly KLS-S Cheetah series Sinusoidal Permanent Motor Controller User’s
Manual V1.26
0
Kelly Cheetah series KLS-S
Light & flexible Sinusoidal Permanent Magnet Motor Controllers
User’s Manual
Devices Supported:
KLS4812S
KLS7212S
KLS8412S
KLS4812Z
KLS7212Z
KLS8412Z
KLS4818S
KLS7218S
KLS8418S
KLS4818Z
KLS7218Z
KLS8418Z
KLS4830S
KLS7230S
Rev1.26
Apr. 2024

Summary

Kelly Cheetah Series KLS-S Users Manual

Devices Supported

Lists the specific KLS-S controller models covered by this manual.

Chapter 1 Introduction

1.1 Overview

Introduces the KLS-S controllers, their applications, and the manual's purpose.

Chapter 2 Features and Specifications

2.1 General Functions

Describes the common operational features and capabilities of the KLS-S controllers.

2.2 Features

2.3 Specifications

2.4 Name Regulation

Chapter 3 Wiring and Installation

3.1 Mounting the Controller

Provides guidance and physical dimensions for correctly mounting the controller unit.

3.2 Connections

3.2.1 Pin Definition of KLS-S Controller

Identifies and explains the purpose of each pin on the controller's connectors.

Pin Definitions for Connectors

3.2.2 Wiring of KLS-S Controller

3.2.2.1 Standard wiring

Presents the primary wiring diagram for common F-N-R control setups.

3.2.2.2 Optional wiring

3.2.3 Communication Port

3.3 Installation Check List

Chapter 4 Programmable Parameters

4.1 Step 1 Voltage and Current Settings

Covers initial parameter setup for voltage limits, current limits, and throttle.

4.2 Step 2 Motor Configuration

4.3 Step 3 Tuning Parameters

4.4 Identification Angle Operation

Chapter 5 Maintenance

5.1 Cleaning

Provides instructions for the safe and proper exterior cleaning of the controller unit.

5.2 Configuration

Table 1: LED CODES

Contact Us

Kelly Cheetah KLS8412S Specifications

General

Brand	Kelly
Model	Cheetah KLS8412S
Category	Controller
Language	English