To Next PageTo Next Page
Need help?Do you have a question about the Kelly Cheetah Series and is the answer not in the manual?
General| Brand | Kelly |
|---|---|
| Model | Cheetah Series |
| Category | Controller |
| Language | English |
Provides a general overview of the Kelly KLS-S controllers, features, installation, and maintenance.
Details various protective functions, input/output capabilities, and operational features of the controller.
Lists key technical features like microprocessor control, rectification, reversing, voltage monitoring, and housing.
Outlines operational frequency, current draw, voltage ranges, and temperature limits for the controller.
Explains the naming convention used for Kelly BLDC motor controllers, including model number breakdown.
Provides guidance on controller orientation, fastening, and ensuring proper heat dissipation for optimal performance.
Details the pin definitions for various waterproof connectors and their functions.
Outlines a pre-operation checkout procedure, including safety precautions and initial power-on checks.
Covers initial programmable parameters like Low Volt, Over Volt, and Current Percent for system setup.
Details parameters related to motor specifics such as nominal current, poles, and speed sensor types.
Explains parameters for adjusting brake regeneration, acceleration, and release times for performance tuning.
Guides users through the critical Identification Angle operation for BLDC motor setup.
Provides instructions for the exterior cleaning of the controller, emphasizing safety precautions.
Explains how to configure the controller using a host computer via RS232 or USB ports.
