Need help?Do you have a question about the Kelly KLS Series and is the answer not in the manual?
General| Motor Type | BLDC, PMSM |
|---|---|
| Dimensions | Varies by model |
| Weight | Varies by model |
| Voltage Range | 24V-72V |
| Storage Temperature Range | -40°C to 85°C |
| Communication | CAN |
| Protection Features | Over-voltage, Under-voltage, Over-current, Over-temperature, Short-circuit |
| Operating Frequency | 16kHz |
Overview of Kelly KLS-M/N brushless motor controllers, their features, and applications.
Details protective features, monitoring, speed control, and input/output functionalities.
Highlights intelligence, efficiency, protection mechanisms, and hardware specifications.
Lists key operational parameters like frequency, voltage, current, and temperature ranges.
Explains the naming structure of Kelly BLDC motor controllers (KLS, voltage, model type).
Provides guidelines for controller orientation, fastening, heat sinking, and airflow.
Details pin definitions and wiring diagrams for connecting the controller to motor and power.
Outlines safety precautions and checks before operating the vehicle with the controller.
Covers Low Volt, Over Volt, and Battery Limit current settings for system protection.
Details parameters like Motor Poles, Speed Sensor Type, and Motor Temperature Sensor.
Explains settings for braking, throttle response, and speed control.
Provides instructions for performing the identification angle operation for motor compatibility.
Details procedures for safe exterior cleaning and safety precautions during maintenance.
Explains how to connect and configure the controller using PC software or Android APP.
To Next Page
