To Next PageTo Next Page
Need help?Do you have a question about the Kelly KHS Series and is the answer not in the manual?
General| Operating Temperature | -30℃ to +80℃ |
|---|---|
| Efficiency | >90% |
| Operating Voltage | 24V-72V |
| Brake Input | Low-level or High-level |
| Communication | RS232 |
| Protection Features | Over-voltage, Under-voltage, Over-current, Over-temperature, Short-circuit |
| Communication Interface | CAN, RS232 |
| Dimensions | Varies by model (check specific model datasheet) |
| Weight | Varies by model (check specific model datasheet) |
Introduces Kelly KHS high voltage sine wave controllers, covering features, installation, and maintenance.
Lists key functionalities like error codes, voltage monitoring, protection, and various sensor inputs.
Details technical features such as microprocessor, rectification, voltage/current monitoring, protection, and cooling systems.
Outlines technical specifications including operating frequency, current, voltage ranges, temperature limits, and weight.
Explains the naming convention for Kelly KHS motor controllers (KHS-I/IPS, KHS-N, KHS-NPS).
Details controller mounting, stressing clean, dry, flat surfaces for optimal thermal performance and heat dissipation.
Provides detailed pin definitions for waterproof connectors DJ7091Y-2.3-11 and DJ7061Y-2.3-21.
Outlines essential pre-operation checks for safe and correct installation and initial system function.
Covers initial parameter settings including Low Volt, Over Volt, Current Percent, and Identification Angle configuration.
Focuses on configuring motor-specific parameters like Nominal Current, Poles, and Speed Sensor Type.
Details settings for regenerative braking (RLS_TPS Brk %, NTL Brk %) and various timing parameters.
Guides users through the identification angle operation process for KHS-N controllers.
Explains the identification angle operation process specifically for KHS-NPS controllers.
Provides instructions for periodic exterior cleaning of the controller, emphasizing safety precautions and proper tools.
Explains how to connect and configure the controller using PC software or Android APP for optimal performance.
Provides the main website address for Kelly Controls for further information.
Offers links to download essential documentation and software for the controller.
Provides the customer support email address for inquiries and technical assistance.
Lists the customer support phone number for direct assistance and inquiries.
