4 specications Kelvinator solar hot water systems
Specifications
Collector Flat panel (KCPF20A)
Collector dimensions per panel (mm) length 2002 x width 1025 x depth 80
Gross surface area 2.05m
2
Aperture surface 1.81m
2
Net weight 34.5kg
Operating positive pressure. max. 1000kPa
Stagnation maximum temperature 199°C
Header pipe outer diameter 22mm
Collector frame material Aluminium
Absorber material 0.12mm copper n with TiNOx selective coating
Glazing 4mm low iron tempered patterned glass
Insulation material 40mm glass wool
Collector Evacuated tube (KCPE12A)
Number of evacuated tubes per collector panel 12
Collector dimensions (mm) length 1390 x width 1640 x depth 100
Gross surface area 2.28m
2
Aperture surface 2.0m
2
Collector capacity 1.6L
Net weight 37kg
Operating positive pressure. max. 1000kPa
Stagnation maximum temperature 272°C
Collector header pipe outer diameter 15.0mm
Collector piping connections 1/2"
Collector frame material Anodised aluminium
Material selective absorber layer Aluminium nitrite