7. Carefully remove the contaminated filter cartridge (Pos. 3) from the
product without stirring up any dust and place it in the disposal bag
(Pos. 5).
8. Seal the disposal bag (Pos. 5) airtight and dispose of it according to
regulations.
9. The installation of the new filter cartridge is (Pos. 3) carried out in
reverse order. Make sure the seals are seated correctly.
10. After installing the new filter cartridge, connect the product to the
power supply again and put it into operation. See also the chapter
Commissioning.
7.3 Maintenance
Regular inspection and servicing have a positive effect on the reliable
functioning of the product.
Observe the warning notices for servicing and troubleshooting in the
“Safety” chapter.
To Next Page
Loading...
