Kemppi FastCool 10 User Manual

Fastcool 10 / 0648 – 7© kemppi oy
6. TEChNICAL dATA
Cooling unit
Connection voltage 24 V DC
Connection capacity 100 % ED 50 W
Cooling power 1 kW
Start pressure, max.
450 kPa
Cooling liquid 20% - 40 % etanol/water
Reservoir volume
ca. 3 l
Overall dimension:
length 570 mm
width 230 mm
height 280 mm
Weight 11 kg
Operating temperature range
-20 … +40 °C
Storage temperature range
-40 … +60 °C
Degree of protection IP 23 C
The products meet the conformity requirements of CE-marking.
7. TERMS OF GUARANTEE
Kemppi Oy provides a guarantee for products manufactured and sold by them if defects in
manufacture and materials occur. Guarantee repairs must be carried out only by an Authorised
Kemppi Service Agent. Packing, freight and insurance costs to be paid by orderer. The guarantee is
effected on the date of purchase. Verbal promises which do not comply with the terms of guarantee
are not binding on guarantor.
Limitations on guarantee
The following conditions are not covered under the terms of guarantee: defects due to natural wear
and tear, non-compliance with operating and maintenance instructions, connection to incorrect or
faulty supply voltage (including voltage surges outside equipment spec.), incorrect gas pressure,
overloading, transport or storage damage, re of damage due to natural causes i.e. lightning or
ooding.
This guarantee does not cover direct or indirect travelling costs, daily allowances or accommodation.
Note: Under the terms of guarantee, welding torches and their consumables, feeder drive rolls and
feeder guide tubes are not covered. Direct or indirect damage due to a defective product is not
covered under the guarantee. The guarantee is void if changes are made to the product without
approval of the manufacturer, or if repairs are carried out using non-approved spare parts.
The guarantee is also void if repairs are carried out by non-authorised agents.
Undertaking guarantee repairs
Guarantee defects must be informed to Kemppi or authorised Kemppi Service Agents within the
guarantee period. Before any guarantee work is undertaken, the customer must provide proof of
guarantee or proof of purchase, and serial number of the equipment in order to validate the guarantee.
The parts replaced under the terns of guarantee remain the property of Kemppi.
Following the guarantee repair, the guarantee of the machine or equipment, repaired or replaced,
will be continued to the end of the original guarantee period.

Kemppi FastCool 10 Specifications

General

Brand	Kemppi
Model	FastCool 10
Category	Welding System
Language	English