Kemppi KEMPOMIG 3200 User Manual

Voltages in the I-line of the control cable between the power source and the wire feeder:
On MMA the voltage of I-line is approx. + 10 V
On MIG/MAG-process the voltage in I-line is approx. + 0,5 - 3,2 V, depending on the dynamics
setting. Note, that when welding with 1-MIG the dynamics setting is optimized according to the
filler material and gas-combination in use, so the adjustment range depends on the chosen 1-MIG
program.
MIG/MAG dynamics - 9 MIG/MAG dynamics 0
MIG/MAG dynamics + 9
15

Kemppi KEMPOMIG 3200 Specifications

General

Brand	Kemppi
Model	KEMPOMIG 3200
Category	Welding System
Language	English