Review this chart to find do-it-yourself solutions for minor performance problems. Any service
needed, other than those described in this owner's manual, should be performed by a Sears
authorized service representative.
WARNING ElectricalShock Hazard
Disconnectelectrical supplybefore servicing or cleaning the unit. Falure to do
so could result in electricalshock or personal Injury,
._ • . •.
Cleaner won't run.
PoorJobotdirtpick-up.
1, Unpluggedat wall _Jlet.
2. Trippedcircuitbreakerfolown fuse
at household servicepanel.
3, On/off swttch not turnedon.
4. Thermal protector tripped.
2.
3.
4,
5.
6,
7,
&
9.
f0.
1. Pluglofirmly,pushon/offswitchtoon.
2. Resetcimuitbreakerorreplacefuse.
3. Push onloff switchto on.
4. Resetthermalprotector.
1. Clean dust_n.
2. Adjustsetting.
Replaceagitator.
CheckCLOG REMOVAL
Check forclogs.
Replacehose.
Replace/fix bert.
Inserthose tully.
Checkfor clogs.
CteaNchange fitters.
Ful or clnggeddustbin.
Wrong pileheight setting.
Worn agitator. 3.
Ctogged nozzteor dustbin port. 4.
Clogged hose. 5.
Hole in hose• 8.
Broken/misptaced belt. 7.
Hose not insertedlully. 8.
Motor protectionsystemactivated• 9.
Dirtyfitters. 10.
Wrong pile height setting. I.
Burned out light bulb• 1.
Brokenbelt• 1,
Bare floorselectorin bare 2.
floor setting.
Bett instaled _ncorrecly, 3.
Attachmentuse restrictsairflow. 1.
New carpetfuzz cloggedair path. 2.
Belt rubbing on carpet/barefloor 1,
selector shaft.
Cleaner picksup f. Adjustsetting.
moveal_e rugs or
xlshe6 too hard,
Ught won'twork, 1. Change light bulb,
Agitatordoesnot turn. 1. Rep|acs belt.
2. Move selector to the carpet setting.
3. Check BELTCHANGING AND
AGITATORCLEANING.
Airflow rastdoted 1, CheckATTACHMENTS.
wi_ attachmentuse. 2. Check CLOG REMOVAL andclean
Soundch_u_gss, hose.
_e noiseas 1. Push selectorall the wayforward.
vacuum la shut off.
23
To Next Page