CHANGING THE PRESSER FOOT
The various attachment feet available for certain
kinds of work are to be fastened to the presser bar.
To attach the foot, raise the presser bar to its highest
position by raising the presser foot lever. Loosen the
presser foot thumb screw, choose the proper foot,
insert from the front. Tighten the screw using the
large screw driver and make sure that the foot is
secure.
TURNING A CORNER
Stop sewing machine with needle in fabric. Raise
presser foot. Turn fabric. Lower presser foot and
continue stitching.
FEED DOG
The feed dog control knob is situated on the right
front of machine bedplate. When knob is turned to
the right feed dog drops and does not pull material.
This allows the operator freedom of movement of
material, as for darning. For regular sewing, turn knob
to the left.
15
To Next Page
Loading...
Need help?
General
