TABLEOF
CONTENTS
Adjusting for Good Stitches ............... 14
Adjusting Pressure of
Presser Foot ..................... 10
Adjusting Tensions ........................ 12-13
Applique ............................................. 26
Basting ................................................ 16
Buttonholes .................................... 24 -25
Buttons ................................................ 23
Changing Attachment Foot ............... 1!
Cleaning and Oiling ........................ 33- 35
Connecting Machine ........................... 4
Decorative Stitching ..................... 18-21
Double Needle ................................. 30- 31
Dual Purpose Needle Plate ............... 11
Fastening a Seam ................................. 16
Feed Dog Control .............................. 10
Gathering ............................................. 27
Hems- Blind Stitch Hem ............... 28 - 29
Identification- Head Parts ............... 2- 3
Inserting Bobbin into
Bobbin Case ..................... 8
Inserting and Removing Material ...... 15
Inserting Pattern Disc ........................ 17
Installing Machine Head ..................... 4
Mending ................................................ 22
Narrow Hemming- 1/4 tl or Less ...... 26
Needle and Thread Table .................. 5
Needle Size .......................................... 5
Overcasting .......................................... 27
Parts List ....................................... 38- 39
Picking up Bobbin Thread .................. l0
Placement of Needle ........................... 5
Removing Bobbin Case
from Shuttle .................. 6
Replacement of Belt ........................... 33
Reverse Stitching ................................. 16
Setting Stitch Length ........................ 16
Setting Stitch Width ........................... 17
Sewing Light ....................................... 4
Sewing on Lace .................................... 26
Sewing on Plastic Films ..................... 32
Straight or Three-Cornered Tear ...... 23
Synthetics ............................................. 32
Threading Upper Machine .................. 9
Turning a Corner .............................. 16
What To Do .................................... 36-37
Winding the Bobbin ........................... 7
Writing and Monogramming ............... 27
To Next Page
Loading...
