BUTTONHOLES
Use disc :_ 1A
Stitch width knob-Red zone
Feed dog control- Left
Cover plate for buttonholes
0
Pinion gear
Remove regular cover plate
and insert buttonhole cover
plate.
24
O
Guide pin
Guide plate
Template
Select desired template and
snap into guide plate.
Pull guide plate all the way
forward so that guide pin is
at S. This will enable you to
start at one end of the button-
hole. Screw guide pin on
guide plate into guide pin hole
on machine bed.
Drop guide plate into place
with template fitting over the
pinion gear.
To Next Page
Loading...
Need help?
General
