Kenmore 16 User Manual

WINDINGTHE BOBBIN
@
Place thread on left
spool post. Draw J
thread as shown.
0
Wind thread around
0
Release clutch by
turning clutch knob
toward you.
Start machine.
• ,,-- ,
bobbin a few times.
0
Place bobbin onto
bobbin winder shaft.
Push bobbin winder
latch until it clicks.
When bobbin is full,
winding mechanism
stops.
0
Tighten clutch knob
and remove bobbin.
!_',i g7

Kenmore 16 Specifications

General

Brand	Kenmore
Model	16
Category	Sewing Machine
Language	English