Kenmore 25370051014 User Manual

READ BEFORE INSTALLING UNIT
MSII Window Mounting (5~8K BTU)
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp
edges that may be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to
move and install the unit. To prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over
an extended period of time.
Handle air conditioner with care. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp
metal fins on front and rear coils.
Make sure air conditioner does not fall during installation.
• SAVE CARTON and these INSTALLATION
INSTRUCTIONS for future reference. The carton is
the best way to store unit during winter, or when not
in use.
• DO NOT USE ANY SCREWS OTHER THAN
THOSE SPECIFIED HERE.
• FOR SAFETY REASONS, THE TOP RAIL MUST BE
SECURELY FASTENED WITH ALL FOUR (4)
SCREWS.
Some assembly is required. Please read these instructions
carefully.
Top Rail Hardware Qty.
3/8" Screw
4
Top Rail 1
f
Qty.Mounting Hardware
1/2" screws
lock frame
(For Wooden windows)
lock frame
(For Vinyl-Clad windows)
sashlock
weather seals
(6"X3/4"X1/12")
window sash seal foam
7
2
TOOLS NEEDED
• Philips Screwdriver
• Drill (If pilot holes are needed)
Before installing, the top rail must be assembled on the unit.
A. Remove the air conditioner from the carton and place on a flat surface.
B. Remove top rail from the rear of the packaging material as shown in Fig. A
C. Align the hole in the top rail with those on the top of the unit as shown in Fig. B
D. Secure the top rail to the unit with the 3/8" Screws as shown in Fig. C
Fig. A _ Fig. B
Packac _.
[
)p Rail 2020211A1447

Kenmore 25370051014 Specifications

General

Brand	Kenmore
Model Number	25370051014
Type	Window Air Conditioner
Room Size Coverage	Up to 350 sq. ft.
Voltage	115V
Fan Speeds	3
Color	White
Warranty	1 Year Limited
Filter Type	Washable

Summary

General Installation Precautions

Safety Warnings

Critical safety advice to prevent injury, damage, and ensure proper unit handling.

Important Notes and Hardware

Key notes for installation, storage, and hardware specifications.

Unit Preparation

Top Rail Assembly

Steps to assemble the top rail onto the air conditioner unit before window mounting.

Window Mounting - Part 1

Filler Panel Installation

How to install the left and right filler panels for a secure window fit.

Window Requirements and Storm Windows

Details on suitable window types, opening sizes, and storm window considerations.

Window Mounting - Part 2

Securing Unit with Frame Lock

Attaching side panels and placing frame locks for window security.

Driving Locking Screws

Instructions for driving screws to secure the unit to wooden and vinyl-clad windows.

Window Mounting - Part 3

Sash Lock and Window Seal

Securing the lower sash with a lock and installing the foam window seal.

Final Checks and Weather Seal Trim

Verifying unit lean for drainage and trimming weather seals.

Removing the Air Conditioner

Window Removal Procedure

Steps for safely disconnecting and removing the air conditioner from the window.