Kenmore 348e - Assembly Instructions

- 9 -
1. Flip the air purier over. Twist
the lter cover counterclockwise
and remove it.
2. Remove the plastic packaging
from the lter and take out the
power adapter, then place the
lter back into the air purier.
NOTE:
The power adapter
comes stored inside the air
purier lter.
3. Replace the lter cover. Make
sure the triangle on the lter
cover aligns with the triangle
on the bottom edge of the air
purier. Then twist clockwise
to lock.
Before assembling the air purier, check the PACKING LIST (page 2).
Use this list to verify that you have received all the components of
your new Kenmore air purier.
Please pay special attention to these hazard alert boxes, and
follow any instructions given. WARNING statements alert you to
such hazards as re, electric shock, burns and personal injury.
CAUTION statements alert you to such dangers as personal
injury and/or property damage.
ASSEMBLY INSTRUCTIONS
WARNING
Electrical Shock Hazard
DO NOT plug into electrical
supply until assembly is
complete. Failure to do so could
result in electrical shock or injury.
To reduce the risk of electric
shock, do not expose to rain.
CAUTION
The included lter is placed
inside the air purier. Make sure
the plastic packaging on the
lter is removed and the lter is
installed correctly before use.