EasyManua.ls Logo

Kenmore 625.348321 - Programming the Timer

Kenmore 625.348321
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WATER SOFTENER START-UP
SECTION 1
6
1C. PROGRAM THE TIMER
FIG. 1
PRESENT TIME
RECHARGE TIME
RECHARGE DAY
SET / CLEAR
ON / OFF
VACATION
HOLD RECHARGE NOW
Solid State Water Softener
SET THE TIMER
Whenthetransformerispluggedintotheelectri-
cal outlet, 12:00 AM, SUnday began to flash in
thetime display. Set thetime of day and present
day of week as follows:
A. SET TIME OF DAY
1. Press the PRESENT TIME AND DAY button
¡ once. Thehour display continues to flash.
2. Press the SET/CLEAR button £ until the
presenthour of theday showsin the display.
Be sure AM formorning hours, orPM for af-
ternoon and evening hours shows.
NOTE:
Press SET/CLEAR and quickly release to move
the hour display ahead 1 at a time to the correct
hour. Or, hold the SET/CLEAR button to move
the display ahead 2 hours each second, to the
correct hour.
3. Press button ¡ once to steady the hour dis-
play, and minutesbegin to flash.Repeat step
A2 to set the correct minutes.
4. Press button ¡ again to steady the minute
display (day will begin flashing). Figure 2
shows the timer set at 3:30 PM. See step B to
set the present day.
B. SET PRESENT DAY OF WEEK
1. Press the SET/CLEAR button £ to set the
present day of the week in the display.
NOTE:
Press SET/CLEAR and quickly release to move
the day display 1 at a time. Or, hold the
SET/CLEAR button to move the day display
ahead 2 days each second.
2. Press the PRESENT TIME AND DAY button
¡againtosteadythe entiredisplay. Figure2
shows the timer set at TUesday.
FIG. 2
.
.
TU
PM
EXAMPLE: This drawing
shows 3:30 PM as the
present time of day, and
TUesday is the current
day of the week.
ON / OFF VACATION
HOLD
RECHARGE NOW
PRESENT TIME AND DAY
RECHARGE TIME
RECHARGE DAY
SET / CLEAR
1
2
3
4
5
No other settings are needed after installing
yourwatersoftener.Thesoftenerisfactorysetto
regenerate every Monday, Wednesday and Sat-
urday(beginningat2:00AM).Formostfamilies,
this gives enough soft water for their needs.
However, if you want the softener to regener-
ateatadifferenttime,orondifferentdays,orto
set for the most efficiency, see Fine-Tuning
Your Water Softener, page 18.
SEE PAGE 9 FOR OTHER TIMER CONTROLS AND FEATURES.

Related product manuals