EasyManua.ls Logo

Kenmore 79048803100 - User Manual

Kenmore 79048803100
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
United States
qS!
iNSTALLATiONAND SERVICEMUST BEPERFORMEDBYA QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR YOUR SAFETY:Do not store or use gasoilne or other
flammable vapors and liquids in the vicinity of this or any other appliance.
Canada
Your new wall oven has been designed to fit a limited variety of cutout sizes to make the job of installing easier. The
first step of your installation should be to measure your current cutout dimensions and compare them to the cutout
dimensions chart below for your model. You may find little or no cabinet work being necessary.
Do not remove
spacers (if equipped) on the
side walls and/or an the back of
1½" (3.8 crn)
Min.
- o1--
NOTES:
1. Base must be capable of supporting 350 pounds (159 kg).
2. Allow at least 21" (53.3 cm) clearance in front of oven for
door depth when it is open.
3. Dimension G (cutout depth) is critical to the proper
installation of the built-in oven. If the oven decorative
trim does not butt against the cabinet, or if noise is heard
on convection models, verify dimension G to assure it is
according to the required dimension.
Needed (see note 4)
Electrical
Junction Box
Figure 1
_4. For a cutout height (H) between 441/2" (113cm) and
451/8'' (114.6cm) add a 2" (5 cm) ,,vide wood shim of
appropriate height to each side of the opening under the
appliance side rails. Lifting the unit wilt allow you to hide
the cutout openings showing above the unit. The bottom
trim of the unit wilt hide the shims at the bottom.
_'5. For a cutout height (H) between 451/8" (114.6 cm) and
467/8" (118.1cm) you can order a larger bottom trim
through your Service Center.
PRO DUCT DIME NSION S
MODEL I A I I C I
27" (68.6 cm) Walt Oven 27 (68.6) 45 9/T6(115.7) 24 5/8 (62.5) 24_/2 (62.2)
30" (76.2 cm) Wall Oven 30 (76.2) 45 9/_6(115.7) 28_/4 (71.8) 241/2 (62.2)
f CUTOUT DIMENSIONS AND CABINET WIDTH
27" (68.6cm) Walt Oven 258/8 (65.1)
30" (76.2cm) Walt Oven 281/2(72.4)
All dimensionsare in inches (cm).
Printedin United States
257/8 (65.7)
29 (73.7)
23_/2 (59.7)
23_/2 (59.7)
44_/4 (112.4) 44_/2 (113)
44_/4 (112.4) 44_/2 (113)
27i/8 (68.9) Min
30i/8 (76.5) Min
P/N 318201546 (1011)Rev.A
English- pages 1-6
Espa_ol -paginas 7-12
Question and Answer IconNeed help?

Do you have a question about the Kenmore 79048803100 and is the answer not in the manual?

Summary

Wall Oven Installation Overview and Safety

Product Dimensions and Cutout Requirements

Details on oven dimensions, cutout sizes, and cabinet width requirements for installation.

Critical Installation Safety Warnings

Essential safety advice on handling, heat, flammable vapors, and spacer usage.

Installation Procedures and Electrical Setup

Installer and Consumer Notes

Important notes for installers and consumers regarding the oven installation process.

General Safety Instructions

Mandatory safety guidelines for grounding, door handling, and ventilation.

Electrical Requirements and Connections

Specifications for voltage, frequency, circuit protection, and wiring connections.

Detailed Electrical Connections

Electrical Shock Hazard Warnings

Critical warnings about electrical shock risks and proper grounding.

Specific Wiring Diagrams

Instructions for 3-wire and 4-wire grounded junction box connections.

Cabinet Installation and Final Steps

4-Wire Grounded Junction Box

Diagram and instructions for connecting to a 4-wire system.

Model and Serial Number Location

Information on finding the serial plate for service and ordering parts.

Cabinet Installation and Door Removal

Steps for installing the oven into the cabinet, including door removal.

Final Installation and Operation Check

Installing Trim Pieces

Instructions for attaching the bottom and center trim pieces.

Unit Insertion and Clearance

Guidance on inserting the unit into the cabinet and maintaining clearance.

Leveling and Final Checks

Anti-tip Mounting Screws Installation

Securing the oven to the wall to prevent tipping.

Leveling the Wall Oven

Procedure for leveling the oven using a rack and level.

Checking Oven Operation

Verifying the functionality of electronic oven controls.

Summary

Wall Oven Installation Overview and Safety

Product Dimensions and Cutout Requirements

Details on oven dimensions, cutout sizes, and cabinet width requirements for installation.

Critical Installation Safety Warnings

Essential safety advice on handling, heat, flammable vapors, and spacer usage.

Installation Procedures and Electrical Setup

Installer and Consumer Notes

Important notes for installers and consumers regarding the oven installation process.

General Safety Instructions

Mandatory safety guidelines for grounding, door handling, and ventilation.

Electrical Requirements and Connections

Specifications for voltage, frequency, circuit protection, and wiring connections.

Detailed Electrical Connections

Electrical Shock Hazard Warnings

Critical warnings about electrical shock risks and proper grounding.

Specific Wiring Diagrams

Instructions for 3-wire and 4-wire grounded junction box connections.

Cabinet Installation and Final Steps

4-Wire Grounded Junction Box

Diagram and instructions for connecting to a 4-wire system.

Model and Serial Number Location

Information on finding the serial plate for service and ordering parts.

Cabinet Installation and Door Removal

Steps for installing the oven into the cabinet, including door removal.

Final Installation and Operation Check

Installing Trim Pieces

Instructions for attaching the bottom and center trim pieces.

Unit Insertion and Clearance

Guidance on inserting the unit into the cabinet and maintaining clearance.

Leveling and Final Checks

Anti-tip Mounting Screws Installation

Securing the oven to the wall to prevent tipping.

Leveling the Wall Oven

Procedure for leveling the oven using a rack and level.

Checking Oven Operation

Verifying the functionality of electronic oven controls.

Kenmore 79048803100 Specifications

General IconGeneral
BrandKenmore
Model79048803100
CategoryMicrowave Oven
LanguageEnglish

Related product manuals