Why are my clothes shrinking in my Kenmore 796.8219?
To avoid shrinkage, please carefully follow the fabric care instructions for your garment, because some fabrics will naturally shrink when washed. Other fabrics can be washed but will shrink when dried in a dryer. Use a low or no heat setting and/or the RACK DRY if available.
What to do if my Kenmore 796.8219 shows error E3?
If your Kenmore Dryer displays the error code E3, it indicates that the water level in the steam feeder might be too low. To resolve this, fill the feeder with water and restart the cycle.
What to do if my Kenmore 796.8219 Dryer shows error E1?
If your Kenmore Dryer displays error code E1, it means the steam generator temperature has exceeded 116 degrees for more than 3 seconds, possibly due to a clogged steam hose or nozzle. Inspect the hose and nozzle for any blockages. Use caution as the hose and nozzle may be extremely hot during and immediately after steam operation.
What does error E4 mean on my Kenmore 796.8219?
If your Kenmore Dryer displays error code E4, it indicates that the steam generator element is not heating properly or the temperature is too low. The steam generator may need to be replaced.
What happens when 'MORE TIME' is pressed on a Kenmore Dryer?
When the MORE TIME button is pressed on the Kenmore Dryer, it adjusts the load size setting, ranging from 1 to 5 articles, or indicates a large load on the display.
Why is the top plate of my Kenmore 796.8219 very warm?
It is normal for the top plate of your Kenmore dryer to get very warm during steam operation.
General| Brand | Kenmore |
|---|---|
| Model Number | 796.8219 Series |
| Appliance Category | Dryer |
| Energy Efficiency | Energy Star Certified |
| Dryer Heating Source | Electric |
| Number of Options | 5 |
| Wrinkle Guard Option | Yes |
| Steam Feature | Yes |
| Moisture Sensor | Yes |
| Interior Light | Yes |
| Color | White |
| Voltage | 240 V |
| Amperage | 30 A |
| Type | Dryer |
| Control Type | Electronic |
| Width | 27 inches |
| Height | 38 in. |
| Drum Material | Aluminized Alloy |
| Drying Programs | Multiple including Normal, Heavy Duty, Delicates, Quick Dry |
Covers general safety, grounding, and steps to take if gas is smelled.
Guidelines for handling sensitive electronics to prevent ESD damage.
Testing procedures for thermal cut-offs, thermostats, and lamp holder.
Resistance checks for heater, thermistor, gas valve, and igniter.
Testing procedures for gas type hi-limit thermostats and thermal cut-offs.
To Next Page
