Risk of child entrapment! Before throwing
away your old appliance, remove the door so
that children may not easily become trapped
inside,
1. Remove all packing materials. This includes the foam
base and all adhesive tape holding the accessories both
inside and outside.
2. Inspect and remove any remaining packaging, tape or
printed materials before turning on the beer dispenser
1. CO2 gas can be dangerousf CO2 cylinders
contain high-pressure compressed gas, which can
be hazardous if not handled properly. Make sure
you read and understand all the procedures for the
CO2 cylinders before installation.
2. Always connect the CO2 cylinder to a regulatod
Failure to do so may cause an explosion resulting
in possible death or injury when the cylinder valve
is opened.
3. Never connect the CO2 cylinder directly to the
product container.
4. Always follow the correct procedures when
changing cylinders.
5. Never drop or throw a CO2 cylinder.
6. Always keep CO2 cylinders away from heat. Store
extra cylinders in a cool place (preferably 70°F).
Securely fasten with a chain in an upright position
when storing.
7. Always ventilate and leave the area immediately if
CO2 leakage has occurredY
8. Always check the D.O.T. (Department of
Transport) test date on the cylinder neck before
installation. If it has been over 5 years, do not use.
Return the cylinder to your gas supplier.
9. Never connect a product container unless there
are at least two safety devices in the pressure
system: one on the CO2 regulator and the other
on the product container or in the pressure gas
line
1. Beer Tower
2. Plastic Gasket
3. Safety Guard Raid
4. Drip Tray
5. Adjustable Thermostat
6. CO2 Regulator
7. CO2 Gas Cylinder
8. CO2 Gas Cylinder Support
9. Evaporator
10. Reversible Door
11. Beer Keg (not included)
12. Metal Plate
13. Metal Washers (2)
14. Casters with Lock (4)
1
3
4 \_
14
BEER TOWER
ASSEMBLY
To Next Page
Loading...