Need help?Do you have a question about the Kenroy Home 51009SNDST and is the answer not in the manual?
General| Product Name | Kenroy Home 51009SNDST |
|---|---|
| Category | Outdoor Fountain |
| Material | Resin |
| Finish | Sandstone |
| Height | 32 inches |
| Pump Included | Yes |
| Light Included | No |
| Power Source | Electric |
| Type | Tiered |
Periodically change water to prevent algae buildup and maintain pump health.
Check solar panel, tubing, and connections. Clean pump if necessary for operation.
Ensure the pump is fully submerged and water level is above the minimum fill line.
Check impeller, housing, and connections. Clean parts gently if needed.
Protect surrounding surfaces from water splashes. Do not place on water-sensitive areas.
Use distilled water to minimize mineral deposits, bacteria, and algae buildup.
Keep children and pets away from the water feature to prevent drowning hazards.
Inspect for moisture build-up weekly, cleaning as necessary, especially in humid environments.
Use water or glass cleaner to clean the surface of the solar panel for optimal performance.
Boost charge by leaving panel off for 2-3 sunny days. Contact support for replacement battery.
Remove back panel, disconnect wires, replace battery (BATTERY2300), and reconnect.
This water feature is designed exclusively for outdoor use and cannot be operated indoors.
Consider safe water exposure areas, splashing, and the environmental sound/lighting effects.
Drain, disconnect, clean, dry, and store in a weather-free environment if temperatures drop below 33°F.
Distilled water is best to prevent bacteria and algae buildup; otherwise, more cleaning is needed.
Empty water, use mild soap and an acrylic brush to clean parts and restore original condition.
Ensure the pump is always submerged in water to prevent damage, checking level regularly.
Water level recedes due to evaporation; check before running, especially in sunny or humid conditions.
Installation and assembly instructions can be found online at www.kenroyhome.com.
Ensure pump submersion and check for contact with walls. Pad if necessary.
The pump speed cannot be adjusted; it operates at a fixed rate.
Use a level and shims on uneven ground to ensure proper water flow and feature stability.
The hose can be shortened to the desired length using a sharp blade or scissors.
Expect up to six hours of operation on a full charge; performance varies with sunlight intensity.
Lights on solar fountains cannot be turned off independently from the water feature.
The solar panel charges the battery when placed in sunlight, regardless of attachment to the pump.
To Next Page