The Kenroy Home Spillway Indoor Table Fountain is a decorative water feature designed to bring peaceful displays to indoor living spaces. This freestanding fountain can be placed in the center of a room or against a wall, making it a versatile addition to various interior designs. It is specifically designed for indoor use, and users are advised against placing it on surfaces that could be damaged by water splashing.
Function Description:
The fountain operates by circulating water through a series of spillways, creating a soothing visual and auditory experience. Water is pumped from a basin to the top of the fountain body and then cascades down multiple levels, mimicking a natural spillway. This continuous flow of water contributes to a tranquil ambiance in any indoor setting.
Important Technical Specifications:
- Water Capacity: The basin requires 0.4 gallons of distilled water to operate effectively, filled a little below the maximum fill line.
- Power Source: The pump cord extends 6 feet from the pump access door of the fountain body and should be connected to a grounded 110V outlet.
- Pump Type: The fountain utilizes a pump with an overheating protection feature. This means the pump will automatically turn off if it becomes too hot due to not being adequately submerged in water. It may take a few minutes for the pump to cool down and resume operation once re-submerged.
- Water Type Recommendation: Distilled water is highly recommended to minimize mineral deposits, bacterial growth, and algae buildup, which can damage the water feature basin and pump.
Usage Features:
- Easy Assembly: The manual provides clear, step-by-step instructions for assembly, starting with attaching the pump to the rubber hose, placing the fountain body into the basin, filling the basin with water, and finally adding decorative river stones.
- Location Flexibility: Its freestanding design allows for placement in various indoor locations, either as a central decorative element or against a wall.
- Pump Speed Control: Depending on the specific pump model, users can adjust the water flow rate by moving a slider or turning a knob on the pump, allowing for customization of the water flow intensity.
- Decorative Elements: The fountain includes decorative river stones (E) to be placed on top of the basin (B), enhancing its aesthetic appeal.
- Safety Features: The pump includes an overheating protection feature, and the manual emphasizes the importance of keeping the pump submerged to prevent damage. Users are also advised to disconnect the power supply before any maintenance to reduce the risk of electrical shock.
Maintenance Features:
- Pump Cleaning: To clean the pump, users should unplug it from the electrical outlet, use a small soft brush or water stream to remove debris. For a more thorough cleaning, the front cover and impeller cover can be removed to access and clean the impeller/rotor assembly and its cavity with clean water. If a sponge filter is present, it should also be rinsed.
- Water Quality Maintenance: Periodically changing the water is crucial to prevent algae buildup and maintain water cleanliness. Distilled water is recommended to reduce mineral deposits and biological growth.
- Troubleshooting: The manual offers solutions for common issues such as the pump failing to run (checking water level, clearing airlocks, checking circuit breaker, tubing, and algae buildup) and abnormal noise (disconnecting power, cleaning impeller/rotor assembly, and ensuring the pump is not touching other parts of the fountain).
- Flow Rate Issues: If the pump exhibits low flow or "burping," users should check the water level to ensure the pump is fully submerged, ideally above any minimum fill line.
- Surface Cleaning: If water flow is uneven, oil and dirt from hands or the environment may be the cause. Cleaning the water feature's surface with a water guiding pad (if included) or a mildly abrasive scrub pad and mild soap is recommended.
- Regular Inspection: A weekly inspection of the water feature, floor, and adjacent walls for moisture buildup is advised, especially in humid environments, with cleaning as necessary.
- Leveling: For proper water flow, the fountain must be level. If placed on uneven ground, leveling shims (wedge-shaped plastic parts) can be used to create a level surface.
- Hose Adjustment: If the tube is too long, it can be cut to the desired length using a sharp blade or scissors.
Warnings:
- The fountain is designed for indoor use only.
- Splashing may occur, especially when first turned on, so surrounding surfaces should be protected.
- Keep small children and pets away from the water feature to prevent accidents.
- Always disconnect the power supply before performing any maintenance or cleaning.
- The manual explicitly states that this water feature is not rated for outdoor use, contradicting a statement in the FAQ section about "outdoor use" and "winterizing." Given the "indoor table fountain" title and the explicit "indoor use only" warning, it's safest to assume it is strictly for indoor use.
For further information and visual guides, Kenroy Home directs users to their YouTube channel: youtube.com/kenroyhomefountains.
Need help?
General
To Next Page