How to fix Kenroy Home Lighting if bulb will not light?
If your Kenroy Home Lighting bulb won't light, start by replacing the light bulb. If that doesn't work, make sure the power supply is turned on and that the plug is fully and properly inserted into the power outlet. Also, check that the circuit breaker is in the on position.
General| Brand | Kenroy Home |
|---|---|
| Model | BRADY |
| Category | Home Lighting |
| Language | English |
Consult an electrician for electrical questions and inspect wire for defects before assembly.
Covers defects in materials and workmanship for one year from purchase, excluding misuse or wear.
Read all instructions, assemble on a soft surface, and inspect parts for damage before proceeding.
Lists all parts included in the package with their corresponding quantities.
Connects the lower, middle, and upper pole sections to the base according to the diagram.
Applies the felt pad to the bottom of the base for protection.
Secures the smaller and larger shades using socket rings and a spacer.
Installs the specified wattage bulbs into the upper and lower sockets.
Details polarized plug usage and precautions to avoid electric shock.
Recommends cleaning with a soft, dry cloth and avoiding harsh chemicals.
Provides guidance for common problems like bulb not lighting or power issues.
To Next Page
