How to fix Kenroy Home Lighting if bulb will not light?
If your Kenroy Home Lighting bulb won't light, start by replacing the light bulb. If that doesn't work, make sure the power supply is turned on and that the plug is fully and properly inserted into the power outlet. Also, check that the circuit breaker is in the on position.
General| Brand | Kenroy Home |
|---|---|
| Model | RIVERSIDE |
| Category | Home Lighting |
| Language | English |
Essential safety precautions to be observed before and during installation.
Inspect wire insulation for defects before assembly; contact customer service if issues arise.
Details of the manufacturer's 1-year limited warranty, including coverage and exclusions.
Read all instructions before assembly and prepare the workspace.
List of tools needed for installation, including safety goggles and screwdriver.
List of hardware parts provided with the lamp, with descriptions and quantities.
Lists the main components of the lamp included in the package.
Steps to unpack the lamp and detach the mounting plate from the backplate.
Instructions for attaching the mounting plate to the wall using screws and anchors.
Procedure for mounting the lamp body to the wall plate using ball finials.
Optional steps for attaching a cord channel and covers to conceal the power cord.
Steps for attaching the shade, installing the bulb, and connecting the power cord.
Steps to disconnect the power cord from the backplate and secure the opening.
Instructions for mounting the plate to an outlet box using outlet box screws.
Guide for wiring the lamp to the house electrical supply using wire nuts.
Procedure for mounting the lamp body to the wall plate using mounting screws and ball finials.
Steps to attach the shade, install the bulb, and prepare the lamp for use.
To Next Page
