EasyManua.ls Logo

Kenroy Home DUET - User Manual

Default Icon
9 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

  • C
    Colleen ChangJul 30, 2025
    What to do if my Kenroy Home Lighting bulb will not light?
    • L
      Lauren EdwardsJul 30, 2025
      If your Kenroy Home Lighting bulb isn't lighting, there are several possible reasons. First, the bulb may have burned out, in which case you should replace it. Second, the power may be off, so make sure the power supply is turned on. Third, the plug may not be fully inserted into the power outlet, so ensure it is properly inserted. Finally, the circuit breaker may be off, so check that it is in the on position.
  • P
    Phillip MendozaAug 12, 2025
    Why does the fuse blow when I turn on my Kenroy Home Lighting?
    • A
      Andrew JonesAug 12, 2025
      A fuse blows, or a circuit breaker trips when the light is turned on because there might be an exposed wire, in which case you should discontinue use of the lamp. Another reason might be that too many items are on one circuit. You can try unplugging other items on the circuit.

Summary

PACKING DIAGRAM

USE AND CARE GUIDE

Pre-Installation

PLANNING INSTALLATION

Read all instructions before assembly and prepare for installation.

PACKAGE CONTENTS

List of all parts included in the package for the lamp.

Assembly Steps

Assemble Poles and Base

Connect poles and assemble the lamp base with provided hardware.

Assemble Harp and Shade

Attach the harp and secure the shade using the finial and washer.

Install Bulb and Connect Power

Insert bulb, ensure correct type, and plug into outlet.

Important Safety Instructions

Care and Cleaning

Troubleshooting

Kenroy Home DUET Specifications

General IconGeneral
BrandKenroy Home
ModelDUET
Light SourceIncandescent
DimmableYes
Voltage120
Wattage60W

Related product manuals