To Next PageTo Next PageHow to fix Kenroy Home Lighting if bulb will not light?
If your Kenroy Home Lighting bulb won't light, start by replacing the light bulb. If that doesn't work, make sure the power supply is turned on and that the plug is fully and properly inserted into the power outlet. Also, check that the circuit breaker is in the on position.
General| Brand | Kenroy Home |
|---|---|
| Model | CALLAHAN |
| Category | Home Lighting |
| Language | English |
Manufacturer warrants lamp against defects in materials and workmanship for one year.
Warranty covers defects in materials and workmanship under normal use. Repair/replacement is exclusive remedy.
Warranty excludes finish due to weathering and consequential/incidental losses.
Read all instructions before assembly. Assemble on a soft, non-abrasive surface.
Lists parts A, B, C, D: Socket ring, Glass shade, Pole assembly, Base.
Unpack lamp, organize parts, and screw pole assembly to the base.
Remove socket ring, place glass shade over socket, and secure with socket ring.
Inspect socket, install bulb, adjust height, and plug in.
Possible causes and solutions for the bulb not lighting.
Possible causes and solutions for fuse or circuit breaker trips.
