How to fix a Kenwei Intercom System that does not work?
If your Kenwei Intercom System isn't working, first ensure that the power is connected and turned on. If the power is on, check if the unit itself is turned OFF. If so, turn the unit on.
What to do if Kenwei E705FC Intercom System cannot call from door station and sounds 'DI DI'?
If you cannot call from the door station, the room station cannot monitor, and you hear a 'DI DI' sound at intervals on your Kenwei Intercom System, it could be due to two reasons. Either there is no main unit in the system (in this case you should reset the unit and then set up the room number), or the main unit is turned OFF (in this case you should turn on the unit).
Why I cannot call from door station on my Kenwei Intercom System?
If you cannot call from the door station on your Kenwei Intercom System, it might be because the connection between the room and door station is cut off; in this case, you should check the connection. Also, verify that the unit is turned on. If it is off, turn the unit on.
What to do if Kenwei Intercom System room station cannot monitor door station?
If the room station cannot monitor the door station on your Kenwei Intercom System, it could be due to two reasons: either the room number has not been set up (in this case you should set up a new room number), or the connection between the room and door station is short circuit (in this case you should check the connection).
Why does my Kenwei E705FC Intercom System sound 'DI DI' at intervals?
If you hear a 'DI DI' sound at intervals when your Kenwei Intercom System connects with more room stations, it could be because the main unit is OFF (in this case you should turn on the unit), or the connection between this unit and the main unit is cut off (in this case you should check the connection).
How to stop continuous 'DI DI' sound on Kenwei E705FC?
If your Kenwei Intercom System sounds 'DI DI' continuously when connected with multiple room stations, this indicates a room number conflict. To resolve this, set up a new room number.
Why is the sound low from door station on my Kenwei E705FC Intercom System?
If the door station can hear the sound from the room normally, but the room station can only hear a very low sound from the door station on your Kenwei Intercom System, it is likely that the talk volume is too low. Adjust the volume to resolve this issue.
Kenwei Intercom System cannot monitor or talk with one room station - what to do?
If your Kenwei Intercom System cannot monitor or talk when connected to only one room station, it means this unit is not the main unit. To fix this, reset the unit and then set up the room number.
General| Brand | Kenwei |
|---|---|
| Model | E705FC |
| Category | Intercom System |
| Language | English |
To Next Page
