Basic Operations
8
Initial Settings
Initial SETUP
Perform this setup when you use this unit first
time.
1
Set each item as follows.
■ [Language]
Select the language used for the control
screen and setting items. Default is “American
English(en)”.
1 Touch [Language].
2 Touch [Language Select].
3 Select the desired language.
4 Touch [
].
For details, see System Setup (P.65) in the
Instruction Manual.
■ [Clock]
Sets the synchronization of the clock and
adjusts it.
For details, see Calendar/clock settings
(P.9).
■ [Display & Button]
Set the button illumination color.
1 Touch [Display & Button].
2 Touch [Button Illumination Color].
3 Select the desired color.
4 Touch [
].
For details, see Display & Button Setup
(P.63) in the Instruction Manual.
■ [Camera]
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
].
For details, see Camera Setup (P.56) in
the Instruction Manual.
■ [OEM SETUP]
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■ [DEMO]
Set the demonstration mode. Default is “ON”.
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.61) in the Instruction
Manual.
!B5K-0761-00_20DDX_K_FP_QSG.indb 8 2020/07/02 14:25
To Next Page
Loading...
Need help?
General
