To Next PageTo Next PageWhy is the radio reception poor on my Kenwood DNR8015BT?
Poor radio reception on your Kenwood Car Navigation system can occur if the car antenna is not fully extended. Ensure you pull out the antenna all the way. Also, check that the antenna control wire is correctly connected, referring to the "Connection" section in the Quick Start Guide to connect the wire correctly.
What to do if there is no output from the subwoofer on my Kenwood Car Navigation system?
If there's no output from the subwoofer, the subwoofer may not be turned on. Turn the subwoofer on. See Speaker setup (P.119).
Why can't I set up the low pass filter on my Kenwood DNR8015BT?
You may not be able to set up the low pass filter because the subwoofer is not set to on. Set the subwoofer to on. See Speaker setup (P.119).
Why can't I set up the high pass filter on my Kenwood DNR8015BT Car Navigation system?
You may not be able to set up the high pass filter because the subwoofer is not set to on. Set the subwoofer to on. See Speaker setup (P.119).
General| Brand | Kenwood |
|---|---|
| Model | DNR8015BT |
| Category | Car Navigation system |
| Language | English |
