36 DNX7200
iPod Control
You can control and listen to songs in your iPod by connecting iPod with video or iPod nano to this unit
with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an
iPod with video.
Functions when Displaying the Easy
Control Panel
Displays a floating control panel in the screen.
NAV
1 2 2 43 3
5
6
1 Switches the source.
2 Fast Forward or Fast Backward.
3 Music/Video Search.
4 Plays or pauses.
5 Displays the Screen control screen. Refer to
<Screen Control> (page 56).
6 Displays the external device control
screen. See <External Device Power Supply
Control> (page 53).
⁄
• The Easy Control Panel is hidden when you touch a
central part of the monitor.
Connecting an iPod
Connect an iPod to this unit.
2 1
3
1 Forward music/video search area
Selects the next music/video.
2 Backward music/video search area
Selects the previous music/video.
3 Information display button area
The information is displayed for 5 seconds.
⁄
• Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
• When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
• If the played song is not a video content, "No iPod Video
Signal" is displayed on the video screen.
• While connecting an iPod, "KENWOOD" appears on the
iPod and the iPod's control is disabled.
To Next Page
Loading...
Need help?
General