To Next PageTo Next PageWhat does “UNRESPONSIVE DEVICE” mean on my Kenwood DPX-5200BT Car Receiver?
If your Kenwood Car Receiver displays “UNRESPONSIVE DEVICE”, ensure the USB device is functioning correctly, and then reattach it.
How to fix “READING” flashing on my Kenwood Car Receiver?
If the Kenwood Car Receiver displays “READING” continuously, try not using too many hierarchical levels and folders. If the issue persists, reload the disc or reattach the USB, iPod, or iPhone device.
What does “UNSUPPORTED DEVICE” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “UNSUPPORTED DEVICE”, verify that the connected USB device is compatible with the unit and that the file systems are in a supported format. Also, try reattaching the USB device.
What to do if my Kenwood Car Receiver says “MISWIRING CHECK WIRING THEN PWR ON”?
If the Kenwood Car Receiver displays “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
How to improve radio reception on Kenwood Car Receiver?
To improve radio reception on your Kenwood Car Receiver, connect the antenna firmly.
How to fix “iPod ERROR” on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, reconnect the iPod or reset the iPod.
Why is my iPod/iPhone not working with my Kenwood DPX-5200BT Car Receiver?
If the iPod/iPhone does not turn on or work with your Kenwood Car Receiver, check the connection between the unit and the iPod/iPhone. Also, disconnect and reset the iPod/iPhone using a hard reset.
How to fix unstable Bluetooth connection on Kenwood DPX-5200BT Car Receiver?
If the Bluetooth connection between your Bluetooth device and Kenwood Car Receiver is unstable, delete the unused registered Bluetooth devices from the unit.
How to fix no sound on Kenwood DPX-5200BT Car Receiver?
If the sound cannot be heard from your Kenwood Car Receiver, adjust the volume to the optimum level and check the cords and connections.
Why can't I pair my device with my Kenwood Car Receiver via Bluetooth?
If you cannot make a Bluetooth pairing with your Kenwood Car Receiver, ensure you have entered the same PIN code on both the unit and the Bluetooth device. You can also try deleting the pairing information from both the unit and the Bluetooth device, then perform the pairing again.
General| DIN size | 2 DIN |
|---|---|
| Impedance | 30 Ω |
| Clock mode | 24h |
| Output power | 50 W |
| Product color | Black |
| Ready for iPod | Yes |
| Volume control | Touch |
| Frequency range | 30 - 15000 Hz |
| Disc types supported | CD-R, CD-RW |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 13 |
| Maximum power per channel | 22 W |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Display type | LCD |
| On Screen Display (OSD) languages | DUT, ENG, ESP, FRE, RUS |
| USB version | 2.0 |
| Bluetooth range | 10 m |
| Bluetooth version | 4.2 |
| Bluetooth profiles | A2DP, AVRCP, HFP, PBAP, SPP |
| Line outputs (RCA) | 2 |
| USB ports quantity | 1 |
| Cables included | DC |
| Operating temperature (T-T) | -10 - 60 °C |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM, LW, MW |
| Preset stations quantity | 24 |
Weight and Dimensions| Depth | 158 mm |
|---|---|
| Width | 182 mm |
| Height | 111 mm |
| Weight | 1700 g |
