To Next PageTo Next PageWhat to do if 'UNSUPPORTED DEVICE' appears on my Kenwood DPX-5300BT Car Receiver?
If 'UNSUPPORTED DEVICE' is displayed, verify that the connected USB device is compatible with the unit and uses supported file systems. You can find information about supported formats on page 30. If the device is compatible, try reattaching the USB device.
Why is the playback order wrong on my Kenwood DPX-5300BT?
The files are played in the order they were recorded. Also, folders are played in the order of their creation date and time, and files within each folder are played alphabetically by file name.
What to do if 'READING' keeps flashing on Kenwood DPX-5300BT Car Receiver?
If 'READING' continues to flash, avoid using too many hierarchical levels and folders. Also, try reloading the disc or reattaching the device (USB/iPod/iPhone).
General| Brand | Kenwood |
|---|---|
| Model | DPX-5300BT |
| Category | Car Receiver |
| Language | English |
Outlines user rights, non-transferability, and limitations of use for the embedded software.
Defines ownership, liabilities, confidentiality, and user responsibilities regarding the software.
Specifies the conditions under which the software license agreement can be terminated by the licensor.
Lists acknowledgements and terms for various open-source software components used in the product.
Details critical safety advice, including battery handling, volume settings, and general usage warnings.
Identifies the key physical components and controls on the car receiver's faceplate.
Guides through the initial setup, including display language, crossover type, and demonstration settings.
Explains how to use the optional remote control for basic functions like volume and source selection.
Step-by-step instructions for setting the unit's internal clock and date.
Details how to adjust various system settings like display illumination, key beep, and source availability.
Instructions on how to select and set the crossover type for optimal speaker performance.
Explains how to find and save radio stations using manual, seek, and direct tuning methods.
Describes how to tune directly to a radio station frequency using the remote control's number buttons.
Guides on inserting discs and connecting USB or iPod devices for media playback.
Details connecting iPod/iPhone and basic playback controls on the unit and remote.
Explains how to activate repeat and random playback for audio files.
Instructions on selecting the correct drive for USB music playback from multiple connected devices.
Covers quick search, skip search, and file selection for music playback.
Details installing and pairing the KENWOOD Remote application with your smartphone or iPod touch.
Explains how to configure the unit to use the remote application with specific devices like iPhone or Android.
Lists the Bluetooth profiles and codecs supported by the unit for various functions like calls and audio.
Guides on how to connect the supplied microphone for hands-free calling.
Step-by-step instructions for pairing a Bluetooth device with the unit for the first time.
Explains how to answer, reject, and manage calls when connected via Bluetooth.
Details how the unit indicates incoming calls and handles them, including auto-answer.
Provides settings to adjust microphone gain, noise reduction, and echo cancellation for clearer calls.
Covers settings for receiving calls, such as auto-answer time and battery/signal display.
Explains how to initiate calls via call history, phonebook, or voice recognition.
Guides on accessing phonebook contacts and dialing numbers directly using the unit.
Instructions on using voice commands to make calls or control phone functions.
Covers settings for connecting/disconnecting devices, deleting paired devices, and PIN code editing.
Explains how to check the Bluetooth device connectivity and profile compatibility using the test mode.
Details how to listen to audio from a Bluetooth-connected device, including switching sources.
Allows customization of sound profiles using manual equalization or preset EQ modes.
Adjusts subwoofer output, tone control factors, bass boost, and loudness for optimal audio.
Provides advanced audio adjustments including subwoofer, fader, balance, and sound effects.
Configures crossover frequencies, slopes, and gains for different speaker setups.
Details specific settings for a 2-way crossover audio configuration, including speaker sizes and frequencies.
Details specific settings for a 3-way crossover audio configuration, including speaker sizes and frequencies.
Configures settings for mid-range speakers and the subwoofer in a 3-way crossover system.
Sets speaker delay times to optimize sound staging based on listening position and vehicle type.
Explains how to automatically calculate speaker delay times for optimal sound staging.
Allows customization of display illumination colors and brightness levels for different zones.
Configures display dimmer function and text scrolling behavior for information display.
Manages clock display options and the unit's display demonstration mode.
Guides on connecting a steering remote control and assigning functions to its keys.
Details how to reset and reassign functions to the steering remote control keys.
Outlines the fundamental steps for safely installing the car receiver unit.
Provides specific steps for mounting the unit into the car's dashboard using brackets and screws.
Tailored instructions for installing the unit in Toyota vehicles, including trim plate use.
Explains how to connect external components like amplifiers and the microphone.
Illustrates the wiring connections for power, speakers, antenna, and remote control.
Provides guidance on cleaning the unit and proper handling of discs.
Lists supported audio file formats for discs, USB, and iPod/iPhone devices.
Details how to change the display information shown on the unit for various sources.
Lists available preset colors and options for custom color selection for the display.
Addresses common problems related to power, display, source selection, and radio reception.
Provides solutions for issues encountered with CD, USB, and iPod/iPhone playback.
Helps resolve issues related to Bluetooth connectivity, audio, and voice calls.
Lists detailed technical specifications for the FM/AM tuner, CD player, and USB connectivity.
Details specifications for audio output, Bluetooth features, and general unit parameters.
Provides specifications for the auxiliary input, general unit parameters like voltage, size, and weight.
