Why is the phone sound quality poor on my Kenwood DPX-5200BT Car Receiver?
If the phone sound quality is poor on your Kenwood Car Receiver, reduce the distance between the unit and the Bluetooth device, or move the car to a location with a better signal.
What does “MEMORY FULL” mean on my Kenwood DPX-5200BT Car Receiver?
If your Kenwood Car Receiver displays “MEMORY FULL”, you have reached the maximum storage limit of your iPod/iPhone.
How to fix no sound on Kenwood DPX-5200BT Car Receiver?
If the sound cannot be heard from your Kenwood Car Receiver, adjust the volume to the optimum level and check the cords and connections.
How to fix unstable Bluetooth connection on Kenwood DPX-5200BT Car Receiver?
If the Bluetooth connection between your Bluetooth device and Kenwood Car Receiver is unstable, delete the unused registered Bluetooth devices from the unit.
Why does my Kenwood DPX-5200BT Car Receiver say “USB HUB IS NOT SUPPORTED”?
This unit cannot support a USB device connected via a USB HUB.
Why won't my Kenwood DPX-5200BT Car Receiver switch to USB source?
If the source does not change to “USB” when you connect a USB device to your Kenwood Car Receiver while listening to another source: The USB port may be drawing more power than the design limit. Turn the power off and unplug the USB device, then turn the power back on and reattach the USB device. If the problem persists, turn the power off and reset the unit before replacing with another USB.
Why is there echo during phone calls on my Kenwood DPX-5200BT Car Receiver?
If you are experiencing echo or noise during a phone conversation with your Kenwood Car Receiver, adjust the microphone unit’s position. Alternatively, check the [ECHO CANCEL] setting.
Why can't I select a source on my Kenwood Car Receiver?
If the source cannot be selected on your Kenwood Car Receiver, check the [SOURCE SELECT] setting.
What to do if my Kenwood Car Receiver USB port is drawing too much power?
If the USB port on your Kenwood Car Receiver is drawing more power than the design limit, turn the power off and unplug the USB device. Then, turn the power back on and reattach the USB device. If the problem continues, turn the power off and on again, or reset the unit before trying another USB device.
How to fix “READING” flashing on my Kenwood Car Receiver?
If the Kenwood Car Receiver displays “READING” continuously, try not using too many hierarchical levels and folders. If the issue persists, reload the disc or reattach the USB, iPod, or iPhone device.
General| DIN size | 2 DIN |
|---|---|
| Impedance | 30 Ω |
| Clock mode | 24h |
| Output power | 50 W |
| Product color | Black |
| Ready for iPod | Yes |
| Volume control | Touch |
| Frequency range | 30 - 15000 Hz |
| Disc types supported | CD-R, CD-RW |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 13 |
| Maximum power per channel | 22 W |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Display type | LCD |
| On Screen Display (OSD) languages | DUT, ENG, ESP, FRE, RUS |
| USB version | 2.0 |
| Bluetooth range | 10 m |
| Bluetooth version | 4.2 |
| Bluetooth profiles | A2DP, AVRCP, HFP, PBAP, SPP |
| Line outputs (RCA) | 2 |
| USB ports quantity | 1 |
| Cables included | DC |
| Operating temperature (T-T) | -10 - 60 °C |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM, LW, MW |
| Preset stations quantity | 24 |
Weight and Dimensions| Depth | 158 mm |
|---|---|
| Width | 182 mm |
| Height | 111 mm |
| Weight | 1700 g |
Highlights critical safety warnings regarding operation and battery handling.
Steps for initial setup, including selecting language and disabling demonstration.
Guide to setting the clock and date for accurate time display.
Guides on connecting iPod/iPhone and USB devices for audio playback.
Steps to connect your device and begin streaming music from Spotify.
Detailed steps to set up and use the KENWOOD Remote app for smartphone control.
Detailed steps for pairing Bluetooth devices, including profiles and the initial connection process.
How to handle incoming and ongoing phone calls, including answering, rejecting, and call management.
Instructions for setting up call reception and initiating calls via Bluetooth.
Methods for accessing contacts, dialing numbers, and storing them for quick access.
Utilizing voice recognition for making calls and controlling phone functions.
Steps to stream audio from a Bluetooth audio player.
How to play music from iPod/iPhone wirelessly via Bluetooth.
Options for customizing sound profiles using manual, easy, or preset equalizers.
Configuring speaker crossover frequencies, slopes, and digital time alignment for precise audio staging.
Adjusting speaker delay and gain for optimal sound staging based on car type and speaker location.
Steps to assign functions to steering remote control buttons.
Crucial instructions for connecting the unit's wiring to the car's electrical system.
Solutions for common problems like no sound, wiring errors, radio reception, and disc playback issues.
Addresses various error messages and connection issues encountered with USB and iPod/iPhone devices.
Solutions for Spotify connection problems, Bluetooth detection, pairing, and general Bluetooth errors.
To Next Page
