Why are the characters displaying incorrectly on my Kenwood Car Receiver?
If the correct characters are not displayed on your Kenwood Car Receiver, note that this unit can only display uppercase letters, numbers, and a limited number of symbols. Also, depending on the display language you have selected, some characters may not be displayed correctly.
What to do if my Kenwood DPX-5200BT Car Receiver does not work at all?
If your Kenwood Car Receiver is not working at all, reset the unit.
Why can't I select a source on my Kenwood Car Receiver?
If the source cannot be selected on your Kenwood Car Receiver, check the [SOURCE SELECT] setting.
Why is there echo during phone calls on my Kenwood DPX-5200BT Car Receiver?
If you are experiencing echo or noise during a phone conversation with your Kenwood Car Receiver, adjust the microphone unit’s position. Alternatively, check the [ECHO CANCEL] setting.
What does “COPY PRO” mean on my Kenwood DPX-5200BT Car Receiver?
If your Kenwood Car Receiver displays “COPY PRO”, a copy-protected file is being played from the disc or USB.
Why can't I pair my device with my Kenwood Car Receiver via Bluetooth?
If you cannot make a Bluetooth pairing with your Kenwood Car Receiver, ensure you have entered the same PIN code on both the unit and the Bluetooth device. You can also try deleting the pairing information from both the unit and the Bluetooth device, then perform the pairing again.
What does “TOC ERROR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “TOC ERROR”, make sure the disc is clean and inserted properly.
What does “NO DISC” mean on my Kenwood DPX-5200BT Car Receiver?
If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
Why does my Kenwood DPX-5200BT Car Receiver say “CONNECTING”?
If your Kenwood Car Receiver displays “CONNECTING”, when connected via USB, the device is connecting to the head unit, please wait. If connected via Bluetooth, the Bluetooth is disconnected, please check Bluetooth connection and make sure both the device and unit are paired and connected.
What to do if my Kenwood Car Receiver USB port is drawing too much power?
If the USB port on your Kenwood Car Receiver is drawing more power than the design limit, turn the power off and unplug the USB device. Then, turn the power back on and reattach the USB device. If the problem continues, turn the power off and on again, or reset the unit before trying another USB device.
General| DIN size | 2 DIN |
|---|---|
| Impedance | 30 Ω |
| Clock mode | 24h |
| Output power | 50 W |
| Product color | Black |
| Ready for iPod | Yes |
| Volume control | Touch |
| Frequency range | 30 - 15000 Hz |
| Disc types supported | CD-R, CD-RW |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 13 |
| Maximum power per channel | 22 W |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Display type | LCD |
| On Screen Display (OSD) languages | DUT, ENG, ESP, FRE, RUS |
| USB version | 2.0 |
| Bluetooth range | 10 m |
| Bluetooth version | 4.2 |
| Bluetooth profiles | A2DP, AVRCP, HFP, PBAP, SPP |
| Line outputs (RCA) | 2 |
| USB ports quantity | 1 |
| Cables included | DC |
| Operating temperature (T-T) | -10 - 60 °C |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM, LW, MW |
| Preset stations quantity | 24 |
Weight and Dimensions| Depth | 158 mm |
|---|---|
| Width | 182 mm |
| Height | 111 mm |
| Weight | 1700 g |
Highlights critical safety warnings regarding operation and battery handling.
Steps for initial setup, including selecting language and disabling demonstration.
Guide to setting the clock and date for accurate time display.
Guides on connecting iPod/iPhone and USB devices for audio playback.
Steps to connect your device and begin streaming music from Spotify.
Detailed steps to set up and use the KENWOOD Remote app for smartphone control.
Detailed steps for pairing Bluetooth devices, including profiles and the initial connection process.
How to handle incoming and ongoing phone calls, including answering, rejecting, and call management.
Instructions for setting up call reception and initiating calls via Bluetooth.
Methods for accessing contacts, dialing numbers, and storing them for quick access.
Utilizing voice recognition for making calls and controlling phone functions.
Steps to stream audio from a Bluetooth audio player.
How to play music from iPod/iPhone wirelessly via Bluetooth.
Options for customizing sound profiles using manual, easy, or preset equalizers.
Configuring speaker crossover frequencies, slopes, and digital time alignment for precise audio staging.
Adjusting speaker delay and gain for optimal sound staging based on car type and speaker location.
Steps to assign functions to steering remote control buttons.
Crucial instructions for connecting the unit's wiring to the car's electrical system.
Solutions for common problems like no sound, wiring errors, radio reception, and disc playback issues.
Addresses various error messages and connection issues encountered with USB and iPod/iPhone devices.
Solutions for Spotify connection problems, Bluetooth detection, pairing, and general Bluetooth errors.
To Next Page
