Why is there no audio from USB audio player connected to Kenwood K-501USB?
If you're not getting audio from a USB audio player connected to your Kenwood Stereo System, verify that the USB cable is properly connected. Also, check that the USB audio player is switched ON.
How to fix time display stopped and blinking on Kenwood Stereo System?
If the time display on your Kenwood Stereo System is stopped and blinking, adjust the correct time by following the instructions in the “Adjusting the Time of Day” section.
How to resolve CD sound skipping on Kenwood K-501USB Stereo System?
If the CD sound is skipping on your Kenwood Stereo System, try cleaning the disc as explained in the “Care and storage of CD” section.
Why Kenwood K-501USB Stereo System loaded CD cannot be played back?
If a CD isn't playing on your Kenwood Stereo System, ensure that the CD is placed correctly with the label side facing up. If it still doesn't play, clean the disc as described in the 'Care and storage of CD' section. If condensation is present, follow the instructions in 'Be careful against condensation' to evaporate it.
Why is there no audio from one speaker on my Kenwood K-501USB Stereo System?
If you're experiencing audio from only one speaker on your Kenwood Stereo System, check that the speaker cables are properly connected, referring to the connections section in the manual. Also, adjust the balance settings to ensure sound is distributed evenly between the speakers.
What to do if there is no audio from headphones with Kenwood K-501USB Stereo System?
If you're not getting any sound through your headphones on your Kenwood Stereo System, start by checking that the headphone plug is fully and correctly inserted. If it is, increase the volume level to a suitable listening level.
How to fix no audio output on Kenwood K-501USB?
If there is no audio output from your Kenwood Stereo System, ensure the cables are properly connected as described in the connections section of the manual. Also, make sure the volume is at an audible level and that muting is off. If you're using headphones, try unplugging them.
How to stop noise interfering with Kenwood Stereo System reception?
To minimize noise interference with your Kenwood Stereo System's reception, position the outdoor antenna away from roads. Also, switch off any nearby electrical appliances that may be causing interference. Try to place the system away from any TV sets.
General| USB Playback | Yes |
|---|---|
| Power Output | 50 W |
| Bluetooth | No |
| CD Player | Yes |
| Speakers Included | Yes |
| Remote Control | Yes |
| RMS output power | 25 W |
| Playback media | CD |
Explains various playback methods for CDs.
Step-by-step guide to playing music files from a USB audio player.
Guide to playing music files from a memory card.
Instructions for playing audio from an auxiliary source.
Guide to playing audio from a Kenwood digital audio player.
Allows saving custom equalizer settings (USER 1-3).
Configures custom equalizer settings for desired sound response.
Methods for finding and tuning to radio stations without presets.
Automatically scans and saves receivable radio stations.
Guide to manually saving radio stations to memory.
Searches for radio stations based on program type (genre).
Copies all tracks from a CD to the USB audio player.
Copies all tracks from a CD to a memory card.
Transfers music files from a memory card to a USB audio player.
Records audio from a Kenwood digital audio player to a memory card.
Records audio from FM or AM radio broadcasts to a memory card.
Records audio from an auxiliary component to a memory card.
Instructions on how to delete music files or folders.
Guide to inputting text for titles or names.
Steps to change the name of music files or folders.
Details on setting timer parameters like time, source, and operation.
Utilizes the TOOL key for one-touch recording operations.
Records CD tracks directly to USB or memory card via TOOL.
Adjusts input levels for AUX or D.AUDIO sources for optimal sound.
Formats the memory card, erasing all contents and settings.
Configures audio quality and recording length.
Sets the speed for recording audio data.
Adjusts the audio input level for recording.
Determines how track marks are automatically or manually set.
Selects between digital or analog input for recording.
To Next Page
