Need help?Do you have a question about the Kenwood KAC-6401 and is the answer not in the manual?
General| Rated Power Output (4Ω 20Hz~20kHz : A, B-ch) | 30W x 4 (0.08% THD) |
|---|---|
| Rated Power Output (4Ω DIN45324, +B=14.4V : A, B-ch) | 30W x 4 |
| Rated Power Output (2Ω 1kHz : A, B-ch) | 40W x 4 (0.8% THD) |
| Bridged Power Output (4Ω 1kHz) | 80W x 2 (0.8% THD) |
| Max Power Output | 160W x 2 |
| Low-Pass Filter (A, B-ch) | 80Hz (12dB/oct.) |
| High-Pass Filter (A, B-ch) | 150Hz (12dB/oct.) |
| Frequency Response (0, -3dB) | 5Hz~50kHz |
| Signal to Noise Ratio | 100dB |
| Sensitivity (Max.) | 0.2V (Rated Output) |
| Sensitivity (Min.) | 5.0V (Rated Output) |
| Input Impedance | 10kΩ |
| Operating Voltage | 14.4V (11V~16V allowable) |
| Current consumption (1kHz 10% THD) | 18A |
Weight and Dimensions| Installation Size (W x H x D) | 268 x 59 x 220 mm (10-9/16 x 2-1/4 x 8-11/16 inch) |
|---|---|
| Weight | 2.9kg |
To Next Page
