Do you have a question about the Kenwood KAC-6402 and is the answer not in the manual?
max power output | 400W |
---|---|
rated power output (4Ω, 20Hz~20kHz, 0.08% THD) | 35W x 4 |
rated power output (4Ω, DIN : 45324, +B=14.4V) | 35W x 4 |
rated power output (2Ω, 1kHz, 0.8% THD) | 50W x 2 |
bridged power output (4Ω, 1kHz, 0.8% THD) | 100W x 2 |
frequency response (+0, -3dB) | 10Hz~45kHz |
sensitivity (rated output max) | 0.2V |
sensitivity (rated output min) | 5.0V |
signal to noise ratio | 100dB |
input impedance | 10kΩ |
low pass filter frequency (12dB/oct.) | 50~200Hz (variable) |
high pass filter frequency (12dB/oct.) | 50~200Hz (variable) |
RMS watts per channel @ 4Ω < 1% THD+N | 40W x 4 |
RMS watts per channel @ 2Ω < 1% THD+N | 50W x 4 |
operating voltage | 14.4V (11~16V allowable) |
---|---|
current consumption | 25A |
dimensions (W x H x D) | 330 x 59 x 242 mm (13 x 2-5/16 x 9-8/16 inch) |
---|---|
weight | 3.0kg (6.6 lbs) |