Need help?Do you have a question about the Kenwood KAC-719 and is the answer not in the manual?
Audio Specifications| rated power output (4 ohm, 20-200Hz) | 150W (0.08% THD) |
|---|---|
| rated power output (2 ohm, 100Hz) | 230W (0.8% THD) |
| max power output (4 ohm) | 300W |
| low-pass filter | 50-200Hz (18dB/oct) |
| infrasonic filter | 15/25Hz (18dB/oct) |
| bass boost circuit | 0dB, 6dB, 12dB (90Hz) |
| frequency response (+0, -3dB) | 5-200Hz |
| signal-to-noise ratio | 100dB |
| sensitivity (max) | 0.2V (rated output) |
| sensitivity (min) | 5V (rated output) |
| input impedance | 10kΩ |
| damping factor | over 2000 (at Sigma Connect) |
General Specifications| operating voltage | 14.4V (11V~16V allowable) |
|---|---|
| current consumption | 21A at rated power |
| installation size (W) | 290 mm / 11-7/16 in |
| installation size (H) | 56 mm / 2-3/16 in |
| installation size (D) | 200 mm / 7-7/8 in |
| weight | 3.04 kg |
To Next Page
