Kenwood KAC-728S User Manual

KENWOOD
KAC-728S
KAC-628
KAC-608S
KAC-428S
INSTRUCTION MANUAL
MODE D’EMPLO!__
AMPLIFICADOR DE POTENCIA ® Page 22-31
MANUAL DE INSTRUCCIONES
KENWOOD CORPORATION
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures willhelp __.
you obtain the best performance from your new power amplifier. .
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. .
Refer to the model and serial numbers whenever you call upon your
KENWOOD dealer for information or service on the product.
Model KAC-728S/628/608S/428S Serial number .
© PRINTED IN USA B64-1359-00 (KM) gee

Kenwood KAC-728S Specifications

General

Channels	2
Signal to Noise Ratio	100 dB
Speaker Level Inputs	Yes
Preamp Outputs	Yes
Built-in Crossover	Yes
Bass Boost	Yes
Frequency Response	10Hz - 50kHz
Input Sensitivity	0.2 - 5 V
Low-Pass Filter	50Hz - 200Hz
Bass Boost at	0 - 12 dB

Summary

Safety Precautions

General Safety Warnings

Precautions to prevent injury, fire, short circuits, and burns from hot surfaces.

Operational Cautions

Precautions for preventing damage to the unit, including power supply and environment.

Protection Function

Power Indicator and Activation

Details the power indicator behavior and situations triggering the protection circuit.

Installation Procedure

Installation Precautions

Important cautions to follow during the installation process, including wiring and switch settings.

Connection

RCA Cable Connection

Speaker Level Input Connection

Power Wire Connection

Troubleshooting Guide