Need help?Do you have a question about the Kenwood KAC-744 and is the answer not in the manual?
General| Channel Configuration | 4-channel |
|---|---|
| Type | Class AB |
| Power Output (RMS) at 4 Ohms | 40W x 4 |
| Rated Power Output (4 ohms) | 40W x 4 |
| Rated Power Output (2 ohms) | 60W x 4 |
| Rated Power Output (Bridged) | 120W x 2 |
| Signal-to-Noise Ratio | 100 dB |
| THD (Total Harmonic Distortion) | 0.08% |
| Frequency Response | 5Hz - 50kHz |
| Low-Pass Filter | 50Hz - 200Hz |
| High-Pass Filter | 50Hz - 200Hz |
| Dimensions (W x H x D) | 330mm x 60mm x 238mm |
| Crossover | Variable |
Adding a subwoofer using line output signals and filter settings.
Explains the filter switch, input selector, and input sensitivity adjustments.
Details on connecting power, ground, and speaker leads correctly.
Warning about minimum speaker impedance to prevent amplifier damage.
Common issues, their causes, and recommended solutions.
Critical warnings for preventing fire, injury, and unit damage.
To Next Page
