Need help?Do you have a question about the Kenwood KAC-7201 and is the answer not in the manual?
Audio Section| max power output | 800 W × 1 |
|---|---|
| rated power output (4 Ω, 20 Hz – 20 kHz, 0.08 % THD) | 150 W × 2 |
| rated power output (2 Ω, 1 kHz, 0.8 % THD) | 230 W × 2 |
| bridged power output (4 Ω, 1 kHz, 0.8 % THD) | 460 W × 1 |
| frequency response (+0, –3 dB) | 5 Hz – 50 kHz |
| sensitivity (rated output, MAX.) | 0.2 V |
| sensitivity (rated output, MIN.) | 5.0 V |
| signal to noise ratio | 100 dB |
| input impedance | 10 kΩ |
| low pass filter frequency (18 dB/oct.) | 50 – 200 Hz (variable) |
| high pass filter frequency (12 dB/oct.) | 150 Hz |
| bass boost circuit (90 Hz) | OFF / +12 dB |
General Specifications| operating voltage | 14.4 V (11 – 16 V allowable) |
|---|---|
| current consumption (4 Ω, 10 % THD) | 43 A |
| dimensions (W × H × D) | 285 × 57 × 305 mm |
| dimensions (W × H × D) in inches | 11-1/4 × 2-1/4 × 12 inch |
| weight | 3.32 kg (7.3 lbs) |
Outlines essential safety measures to prevent personal injury and fire hazards during installation and operation.
Details precautions to prevent damage to the amplifier and connected equipment from electrical or environmental factors.
Specifies unsuitable installation locations and precautions regarding heat dissipation, wiring, and safety parts.
Identifies all input, output, and power terminals on the amplifier and explains their functions.
Details stereo and bridged connection methods for speakers, including impedance requirements.
Explains how to connect audio sources using RCA cables or speaker-level inputs.
Guides on connecting speaker wires and power wires, including battery and ground connections.
To Next Page
