To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KAC-941 and is the answer not in the manual?
Audio Section| max power output (2 channel mode) | 160 W + 160 W |
|---|---|
| max power output (3 channel mode) | 80 W x 2 + 160 W |
| max power output (4 channel mode) | 80 W x 2 + 80 W x 2 |
General| operating voltage | 14.4 V (11~16 V allowable) |
|---|---|
| current consumption (max) | 30 A |
| dimensions (W x H x D) | 280 x 50 x 200 mm (11 x 1-15/16 x 7-7/8 in) |
| weight | 3.1 kg (6.8 lb) |
Avoid direct sunlight, heat sources, and water splashes for safe operation and unit longevity.
Choose a well-ventilated spot away from heat and direct sunlight, considering airflow for the cooling fan.
Be careful when making holes; avoid fuel lines, brake tubes, and wiring. Use supplied screws for secure mounting.
Configure the unit for subwoofer output and adjust the cut-off frequency using dedicated controls.
Engage the high pass filter to cut low frequencies on the A side output and adjust the frequency.
Set the mode switch based on speaker impedance and desired output method (e.g., bridged).
Illustrates system configurations using bridged output or subwoofer systems.
Connect the power supply lead, ground lead, and fuse securely to the vehicle's electrical system.
Connect speakers to the appropriate outputs (A/B) and audio sources to the input terminals.
Diagnose and resolve common problems like low sound level or distorted audio quality.
Details key technical specifications including power output, frequency response, and dimensions.
